You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page :michka:research:microbial_fuel_cells:its, named after your query.
- pin on 1381E pin 3, we obtain a 2.8V voltage on its output pin (pin 1), which is the same value as th... that the 1381E does not supply enough current to its output pin to power the BBC microbit.
==Test #3 ... BC microbit goes off when :
* the voltage on its input pin goes roughly below 1.76 V.
* the v... BC microbit goes off when :
* the voltage on its input pin goes roughly below 1.72 V.
* the v
h took-of on the second day of the Hackathon, and its LED was blinking twice every second on the end of... o 0.4 V.
He decided to plug the Hackerboard with its red LED on the B Mudwatt, to see what happened… a... a while, like if the monitoring had sucked up all its energy. At that moment, the open-circuit voltage ... ’s PHS design ?===
Mudwatt’s PHS - also known as its Hackerboard - is super simple: it consists of a s
t) opens the gate of a 2N3904 transistor to power itself, while running on a short spike of power contr... he 1381 voltage detector between 2.4 V and 2.2 V, itself letting the current flow through a 2N3904 (sch... by Mudwatt) will charge the supercap connected to its output at most at 1.8 V, which is not enough neit... did not change anything (the BBC micro would stop its blinking LED after 8 blinks)
* We tried to con
om of Scheutbos Park in Sint-Jans-Molenbeek.
* Its approximate volume is 50 cl.
* On top is a hig... om of Scheutbos Park in Sint-Jans-Molenbeek.
* Its approximate volume is 3 cl.
* On top is a salt... with a tea spoon of mud from Scheutbos Park.
* Its approximate volume is 7 cl.
* On top is a salt
