Search

Fulltext results:

cardiff5 @michka:research:microbial_fuel_cells

5 Hits, Last modified: 10 years ago

the B Mudwatt, and it did not blink for a while, like if the monitoring had sucked up all its energy. A... itor without any charge pump. Our regular Mudwatt-like MFC design does not allow for such high voltages,... charge will be stuck at the MFCs output, which is likely to be a few hundred mV at best. Thomas’ design... ybolt.info/wordpress/?p=2872|Air cores]], which I liked for their simplicity, does not seem to be very a

cardiff6 @michka:research:microbial_fuel_cells

5 Hits, Last modified: 8 months ago

de wires are then connected to the Mudwatt board, like in the kits * each electrode has a reported ... de wires are then connected to the Mudwatt board, like in the kits * each electrode has a reported re... de wires are then connected to the Mudwatt board, like in the kits * no resistance was measured on el... de wires are then connected to the Mudwatt board, like in the kits * no resistance was measured on el

banana-peel-bioplastic

1 Hits, Last modified: 12 years ago

s Ended up as a black unstructure & cooked-puree like structure (not a plastic at all). ===Trial 2===

microbial_fuel_cells

1 Hits, Last modified: 8 years ago

p. No air pump, but lower performances. Something like charcoal is used as an electrode material. I al

printer_dynamo

1 Hits, Last modified: 12 years ago

, which was difficult to built by non-specialists like us. We therefore moved to the second design. It